Technical Specification

Segam Tiles PVT LTD Quality Standards

Standards according to ISO 13006:Annex G-EN 14411: Annex G. Dry - Pressed Ceramic TIles , Group Bia < ( ED < 0.5%)

Technical Feature	Test Method	Requirements		Segam Values
Technical Feature	Test Method	%	mm	%	mm
A. Dimensions and Surface Quality
Length and Width	UNI EN ISO 10545 -2	+ 0.6%	+ 2.0	+ 0.20%	+ 0.20%
Thickness		+ 5.0%	+ 0.5	+ 4.00%	+ 0.4
Straightness of Sides		+ 0.5%	+ 1.5	+ 0.20%	+ 1.0
Rectangularity		+ 0.5%	+ 2.0	+ 0.20%	+ 1.2
Surface Flatness a) Centre Curvature b) Edge Curvature c) Warpage		+ 0.5% + 0.5% + 0.5%	+ 2.0 + 2.0 + 2.0	+ 0.10% + 0.10% + 0.10%	+ 0.5 + 0.5 + 0.5
Surface Quality		A maximum 95% of the tiles shall be free from visible effects that woud impair the appearance of a major area of tiles.		Compliant
B. Physical Properties
Water Absorption	UNI EN ISO 10545 -3	Eb 0.5 % Induvudual maximum : 0.6% (absorbed water mass)		Eb 0.1 % (absorbed water mass)
Breaking Strenght	UNI EN ISO 10545 -4	Min. 1300 N		1700 N
Modules of Rupture	UNI EN ISO 10545 -4	Average minimum 35 N/mm Individual minimum 32 N/mm		37 N/MM
Frost Resistance	UNI EN ISO 10545 -12	Required		Compliant
Coefficient of linear thermal expansion from ambient temperature to 100c	UNI EN ISO 10545 -8	Required		+6x10 k max
Scratch Hardness ( Mohs Scale )	EN 101	Declared by the manufacturer		3 to 6 Depends on finish & Color
Crazing Resistance	UNI EN ISO 10545 -11	Declared by the manufacturer		4 Cycle Pass
C. Chemical Properties
Resistance to Staining	UNI EN ISO 10545-14	Minimum Class 3		5
Resistance to Household Chemicals and Swimming Pool Salts	UNI EN ISO 10545 - 13	Minimum GB		GA
Resistance to Low Concentrations of Acids and Alkalis		To be reported		GLA
Resistance to High Concentrations of Acids and Alkalis		To be reported		GHA

Note: Colours shown are as accurate as the limitations of the printing results on paper are possible Praspective customers are advised to inspect a sample of the tile before placing the order. Ever effort has been taken to ensure the accuracy of the information given. However, the company reserves its right to change/alter the specifications without any prior notice. Sometime shade variation or size variation may occur, as this is inherent property of ceramic tile industry. Before fixing the tiles, all are advised to follow the laying instructions printed on the corrugated box of the tile. Company does not take/carry any responsibility of what so ever nature, once tiles are laid.